CAE analysis technology
full loading technology
application of high strength steel
The finished vehicle is insulated and the battery compartment is completely physically separated from the passenger area. The battery compartment will not be fired and exploded during the fire (direct burning for 60s, indirect burning for 70s) to ensure passenger safety.
under normal conditions for 30min
Protection level reaches IP68
The vehicle does not ignite or explode in the case of wading (the product protection level is IP68, in the case of soaked for 24 hours at a water depth of 50cm at the power turn-off state; or operates for 30min in a water depth of 30cm under normal conditions), and operates normally when water accumulates on the road;
The key components such as motor and electric control are designed for water cooling; the protection level reaches IP68;
The vehicle is driven at a speed of 5-10km/h in a pool with a water depth of 30cm. This the vehicle wading experiment. Within 10min after the test is completed, the measurement should be carried out according to the insulation resistance measurement method in GB/T18348.3-2015. The total insulation resistance value should be greater than 1MΩ.
The battery has undergone rigorous factory testing to ensure durability, and can provide a 5-year warranty and an 8-year extended warranty.
After strict high temperature, short circuit, extrusion, soaking, overcharging, puncture and other destructive experiments, there should be no fire and smoke accident.
The battery box BMS circuit board is upgraded. The failure rate is reduced, and the reliability and safety of the battery system are improved; the battery can operate normally under various complicated environments such as wading, mud impact, extreme low and high temperature.
Warranty available
Extended warranty